Camphene Terpene Isolate

Dissolve crystals into a warm carrier oil, PG or your product base before use, stirring until fully dissolved; do not exceed the solubility limit or crystals may re-form.

• Weigh on a 0.01g digital scale rather than counting drops.
• Pre-dilute into a carrier that suits your product: MCT or another carrier oil for oil-based recipes, a PG/VG or water-soluble base for water-based recipes, or add directly to melted wax or soap at the recommended stage.
• Start at a low percentage of total recipe weight, test a small batch, then adjust.
• Usage rates vary by compound and application, so always stay within the limits that apply to your product — the FSANZ Food Standards Code for food and drink, and IFRA Standards for cosmetics, candles and soap.
• We encourage you to research recommended usage levels for your specific recipe and application before you start.

Manufactured using food-grade, non-GMO ingredients with no CBD or THC. Each batch is subject to quality control testing to ensure consistency and purity.

Certificate of Analysis (COA): Available upon request.

Storage

• Keep the container tightly sealed and dry; limit air exposure.
• Store upright in a cool, dark place below 20°C, away from heat, direct sunlight and ignition sources.
• A slight change in colour over time is normal and does not affect quality.

Safety

• 100% concentrated and combustible — must be diluted before use.
• Do not ingest undiluted or apply directly to skin.
• Wear gloves and eye protection and read the Safety Data Sheet (SDS) before handling.
• Avoid contact with eyes; if contact occurs, rinse thoroughly with water.
• For adults 18+ only.
• Keep out of reach of children and pets.
• Seek professional advice before use if pregnant, breastfeeding or under medical supervision.